In Awin’s Link Builder, give each placement its own label in the first Click Reference field. Put the generated links in their corresponding placements, then open Reports → Click References to compare clicks, transactions and reported commission for each label.
You put the same product link in a comparison table and a button farther down the page. Awin reports a sale. Which placement got the credit? If both links carry the same reference, the report has one bucket for both.
Give each placement a label you can recognise
A ClickRef is a label you add to an Awin affiliate link. Put the placement you most want to measure in the first Click Reference field. Awin’s standard Click References report uses that first value, so you can see clicks, transactions and reported commission side by side. [1] [2]
Use short, lowercase labels and write down what each one represents. If you want to distinguish two placements on a single article, include the article and the placement in each label.
| Placement | Example ClickRef | What it measures |
|---|---|---|
| Comparison table in a hiking-pack guide | daypacks-table | The product link in that guide’s table |
| Button below the product write-up | daypacks-review-button | The same product link below the write-up |
Keep the part that makes the label unique within 50 characters. Awin’s report shows the first 50 and groups references that share that visible prefix. Keep labels at placement level and leave out reader names, email addresses and order details. Awin says the advertiser can see the first reference. [1] [2]
Build two links to the same product page
- In Awin’s publisher dashboard, open Toolbox → Link Builder. Choose the advertiser from your joined programmes.
- Paste the advertiser’s product URL. Use the original destination without old tracking tags attached.
- Enter
daypacks-tablein the first Click Reference field, select Generate Link and copy the result into your comparison table. - Generate a second link with the same advertiser and product URL, using
daypacks-review-buttonas the first reference. Use it on the button under the review. - Reopen each link from the page where readers will use it. Check that both reach the intended product. If a link manager sits in front of Awin, confirm that it sends each placement to the corresponding generated URL. In the long Awin link, check for the expected
clickrefvalue.
Start with the long links while you check the setup. They make it easier to spot a copied label or a shared redirect that sends both placements through the same URL. For a test transaction, use your programme’s approved procedure or ask its support team. [3] [4]
Find the placement in your Awin reports
Open Reports → Click References. Select a period that covers traffic after you installed the links, then choose your advertiser if it appears in the filter. Search for each full ClickRef or find both rows in the table. Awin’s ClickRef filter expects the complete value, and the advertiser filter lists active partnerships. [2]
Use Clicks to see how much traffic each link sent, Quantity for the transaction count and Commission for reported commission. Amount is the tracked sales value. If you need the status of individual transactions or references in fields such as clickref2, use Reports → Transactions and export the data as CSV or Excel. [2] [4] [5]
Worked example: the busiest link can earn less per click
These numbers are hypothetical. Both placements send readers from the same guide to the same product. Reported commission per Awin click is the commission shown for each row divided by its click count.
| Placement | Awin clicks | Transactions | Reported commission | Per Awin click |
|---|---|---|---|---|
| Comparison table | 160 | 4 | $48 | $0.30 |
| Review button | 60 | 3 | $36 | $0.60 |
The comparison table brought in $48 from more clicks. The review button earned twice as much per recorded click in this example. Readers who scroll to the button may already be further along in their decision. Seven total transactions offer a reason to keep measuring both links before changing the page. Check transaction statuses before using either number in your cash forecast.
When a ClickRef is missing
- Neither label appears. Confirm the date range and check the URLs from the published placements. If you put the placement in a secondary reference field, look in the transaction export or move it to the first field for future clicks.
- Both placements show under one label. Check for a reused URL, a shared redirect, or labels that share the same first 50 characters. Update the affected links and record the change date.
- Awin shows clicks and zero transactions. This confirms those links received recorded clicks. Check the individual transaction report and allow time for conversions to appear. If you have evidence of an eligible transaction and the expected record is missing, ask Awin or the advertiser what they need to investigate.
Changing a link today gives future clicks a new label. Older clicks and their associated transactions keep the tracking information captured at the time.
Tag two links on one page today
Choose a page that already sends traffic to one Awin advertiser. Tag two links to the same product, save the labels and the change date, and open Reports → Click References after both placements have had traffic. Check that you can read each row before tagging the rest of your site.
Documentation checked 20 November 2026.
[1] Awin’s ClickRef guide ↗ [2] Awin’s Click References report ↗ [3] Awin Link Builder instructions ↗ [4] Awin’s guide to reporting on individual links ↗ [5] Awin’s publisher transaction report ↗Real Affiliate Case Studies Are Being Discussed Inside
See traffic angles, monetization breakdowns, and campaign ideas from affiliates testing what actually works.
Real case studies. Real traffic angles. Real discussions from affiliates testing what actually works.
See What Real Affiliates Are Discussing